Pumps and Filtration Accessories |
 | | |
| MF Filter Forceps For safe handling of filter membranes Handle Millipore membrane filters without damage using highly polished stainless steel forcep blades with beveled, unserrated tips. Sterilize by autoclaving or flame. |
|
| Millivac™ Vacuum Pumps Maintenance-free, mini-diaphragm pumps Millivac vacuum pumps are compact, maintenance free pumps that provide a consistent source of vacuum for filtration and other laboratory applications. A patented diaphragm design has reduced the footprint of the pumps compared to conventional models |
|
| Vacuum/Pressure Pump For flow rates of up to 37 L/min The High Output Pump features a piston-driven design for greater power. |
|
| Peristaltic Pumps For flow rates of up to 13 L/min A variable-speed (60–600 RPM) pump drive allows flow rates ranging from 480 to 1,680 mL/min, depending on pump head selected. Pump heads must be ordered separately. For higher flow rates up to 13 L/min, an Easy-Load pump, complete with pump head, is available. |
|
| Fixed Speed Peristaltic Pump Assembly For flow rates of up to 100 mL/min Provides constant flow of 80–100 mL/min (depending on AC frequency) |
|
| | |
| Syringes and Hand Vacuum Pumps For dispensing and filtering small liquid volumes Use polypropylene syringes to dispense liquids into small containers and pressure-filter small volumes through filter holders or filter units with female Luer slip inlets. Syringes have male Luer slip outlet. An accessory 2-way vacuum valve, nylon male-to-male Luer adapter and rubber tubing with male Luer inlet, convert a standard syringe into a hand vacuum pump. |
|
| Pressure Vessels For dispensing volums up to 20 L Dispensing pressure vessels hold liquid for filtration through Millipore pressure-operated filter holders, if connected to an external pressure source. Vessels meet ASME-UM Code requirements. Closures are secured by cam-lock handle. Vessels are autoclavable when vented. Accessory code-complying relief valve, pressure gauge and hose connectors are available. Accessory closure adapts vessels for vacuum use. |
|
| Pressure Vessel, 600 mL Bench-top pressure reservoir for use with accessory filter holder Use for particle-free filling of vials with extemporaneous drugs, allergenic extracts and ophthalmic solutions. Connect Swinnex 47 mm filter holder to outlet ball valve for filtration. |
|
| Chibitan II Personal Centrifuge For clarification or ultrafltration - Compatible with Ultrafree® - MC centrifugal filters* - Process six centrifugal tubes at a time - Automatic timer - Lightweight and compact: ideal for desktop use |
|
| Integrity Tester For bubble-point testing of small filter units Convenient bubble-point testing for vented and non-vented devices. Tests a wide range of pore sizes and membrane types. |
|
| Filtering Flasks For vacuum filtration with Millipore filter holders Side arm connects to vacuum source with 3/8in. I.D. hose. 1 L and 4 L flasks accept no. 8 perforated stopper. 125 mL flask accepts no. 5 stopper. |
|
| Filter Holder Manifolds 3-Place PVC, 3- and 6-Place Stainless Steel Vacuum manifolds support simultaneous filtration of three or six test samples. Use Millipore glass, plastic or stainless steel filter holders fitted with standard No. 8 perforated stoppers over holder outlets. Manifolds connect to single vacuum source and use separate control valves at each station for independent operation. |
|
| Fluid Sampling Kits For liquid sampling through 37 mm monitors For sampling turbine fuels, water or other liquids through Millipore Contamination Analysis Monitors prior to gravimetric or colorimetric analysis. The stainless sampler assembly plugs into a quick-release valve installed in the system line, which allows a measured quantity of liquid to pass through the monitor filter. |
|
| Fluids Contamination Analysis Kit Using 47 mm membranes Conforms to standard contamination test procedures such as ARP-598 (hydraulic fluids), ASTM-D2276 (aviation turbine fuels), and federal standard 791a (lubricants, liquid fuels, and related products). Includes expendable materials for approximately 600 tests. |
|
| Patch Test Kit For colorimetric fluid contamination analysis Monitors particulate contamination rapidly in hydrocarbon-based hydraulic fluids, bulk chemicals, boiler water and lubricating oils. Filter color rating and particle assessment scales correspond to recognized standard contamination levels. Detects significant changes in cleanliness through dependable and sensitive test results. Comes with filters for 100 tests. |
Product News & Releases
- Faster Flow Rates for Sterile Filtration - New Millex® syringe filters with Millipore Express PLUS (PES) membrane
- Millipore Enhances Millex® Product Line by Introducing 33 mm Nylon Syringe Filters
- Millipore Announces Protocol for the Concentration of Genomic DNA for Forensic Analysis
- Millipore Optimizes Protein Fractionation Using Ultrafiltration
Featured Products
