Final Aseptic Filling

Millipore recommends running small-scale trials for capacity and throughput screening for the best candidates. If capacity data illustrates that fluid is a non-plugging stream (³1,000 L/m²) then sizing is based on flow rate and pressure drop requirements.

Millipore recommends normalizing for pressure and area of the OptiScale small-scale screening capsules. This table provides details on process development devices for recommended filters and alternatives since the ideal solution will vary based on each fluid stream. The following order table is for recommended devices only.

Filter Format Area/Filter Catalogue No.

OptiScale Devices

Milligard SC 1.2 µm + 0.5 µm membrane
13.8 cm² SWSCA47FF3

Milligard SS 0.5 µm + 0.2 µm membrane
13.8 cm² SWSSA47FF3

Milligard 1.2 µm membrane
13.8 cm² SW19A47FF3

Milligard 0.5 µm membrane
13.8 cm² SW06A47FF3

Milligard 0.2 µm membrane
13.8 cm² SW03A47FF3

OptiScale Devices

Durapore 0.22 µm membrane
13.8 cm² SVGLA47FF3

Millipore Express SHF 0.2 µm membrane
13.8 cm² SGEPA47FF3

Double-layer Millipore Express SHC 0.5 µm + 0.2 µm membrane
13.8 cm² SHGEA47FF3

Filter Format	Area/Filter	Catalogue No.

OptiScale Devices
Milligard SC 1.2 µm + 0.5 µm membrane	13.8 cm²	SWSCA47FF3
Milligard SS 0.5 µm + 0.2 µm membrane	13.8 cm²	SWSSA47FF3
Milligard 1.2 µm membrane	13.8 cm²	SW19A47FF3
Milligard 0.5 µm membrane	13.8 cm²	SW06A47FF3
Milligard 0.2 µm membrane	13.8 cm²	SW03A47FF3
OptiScale Devices
Durapore 0.22 µm membrane	13.8 cm²	SVGLA47FF3
Millipore Express SHF 0.2 µm membrane	13.8 cm²	SGEPA47FF3
Double-layer Millipore Express SHC 0.5 µm + 0.2 µm membrane	13.8 cm²	SHGEA47FF3

Product News & Releases

» View All

Final Aseptic Filling

Product News & Releases

Featured Products