S.D.S. Systems – Purified Water Storage & Distribution

S.D.S. Systems – Purified Water Storage & Distribution Store 200 to 350 Liters of pure water

Complete, Compact Systems for the Storage and Distribution of Purified Water
Millipore’s compact S.D.S. Storage and Distribution Systems are designed to store 200 to 350 liters of purified water produced by Elix or RiOs systems, and to maintain consistent purity of stored water, provide effective protection against airborne contamination and distribute the purified water under pressure to multiple-use locations.


Maintain Consistent Purity of Stored Water
- Compact design which allows any Elix or RiOs system to be installed directly on top
- Polyethylene reservoir allows for minimal release of organics
- Conical reservoir bottom allows complete cleaning, draining and rinsing
- Advanced vent filter prevents airborne contaminants such as CO₂, particles, micro-organisms and volatile organic compounds from entering the reservoir
- Hermetically sealed cover prevents unfiltered air from entering
- Optional ASM Automatic Sanitization Module prevents bacterial growth and biofilm build-up inside the reservoir during storage
- Distribution pump is controlled directly by the Elix or RiOs system


ASM Automatic Sanitization Module
The optional ASM Automatic Sanitization Module prevents bacterial proliferation and the build-up of a bacterial biofilm on the inner surface of S.D.S. reservoirs.
- The ASM module contains a 254 nm UV lamp, selected for its germicidal properties
- Compact design allowing easy installation on top of S.D.S. reservoirs
- Direct control from Millipore Elix or RiOs systems for maximum effectiveness


Centralized Large-Volume Water Purification Systems
Millipore offers centralized, large-volume water purification systems, producing up to 8000 liters/day, for a single laboratory, a suite of laboratories or an entire laboratory building. Millipore provides support throughout from design and installation to preventive maintenance and validation services, working in partnership with all parties involved in a project to meet exact specifications.


Specifications    (return to top)

S.D.S. 200 S.D.S. 350 Volume 200 liters (53 gallons) 350 liters (92 gallons) Dimensions (H x W x D) 1020 x 600 x 700 mm (40 x 24 x 27.5 in.) 1420 x 600 x 700 mm (56 x 24 x 27.5 in.) Weight (filled with water) 250 kg (550 lbs) 390 kg (860 lbs) Area required 0.42 m2 (4.5 ft2) 0.42 m2 (4.5 ft2) Pump performance (for systems with standard pump) 30 L/min at 3 bar pressure (8 gallons/min at 45 psi) (Pump operation is controlled by Elix or RiOs water systems). Millipore Application Specialist will optimize pump to meet specific requirements. ASM Specifications Total length   320 mm (12.6 in.) Length of quartz housing for UV lamp 215 mm (8.5 in.) Length of cable for direct connection to Elix or RiOs system 5 m (16.4 ft) Replacement of the UV lamp requires the ASM module to be raised 250 mm (9.8 in) above the SDS reservoir. ASM operation is controlled and powered directly from the Elix or RiOs water system. Please contact your local Millipore representative for more detailed information and to determine the best configuration to meet your needs.