Polygard‑CR Cartridge Filters
Description
Polygard®-CR products are nominally rated filters designed for particle removal applications in liquids and gases. The graded-density depth structure of Polygard-CR filter media provides maximum filtration capacity, and the all-polypropylene construction offers low extractables levels and broad chemical compatibility.
Polygard-CR cartridge filters provide high throughput with minimal differential pressure. Cartridges are robust, strong, resilient and are designed to withstand multiple steam-in-place cycles.
Regulatory Compliance
Polygard-CR filters are designed, developed, and manufactured in accordance with a Quality Management System approved by an accredited registering body to an ISO® 9000 Quality Systems Standard and are shipped with a Certificate of Quality. Each cartridge filter is supported by a Validation Guide for compliance with regulatory requirements.
For traceability and easy identification, each filter is marked with identifying characteristics.
Multiple Formats Available
A full range of filtration areas is available to suit varying application requirements. A variety of connection options are offered for easy adaptation to existing housings.
Typical Clean Water Flow Rate vs Pressure Drop
Cartridge Legends Refer to Pore Size (nominal):
CRK1 = 0.1 µm
CRK3 = 0.3 µm
CRA5 = 0.5 µm
CR01 = 1.0 µm
CR03 = 3.0 µm
CR05 = 5.0 µm
CR10 = 10.0 µm
10-inch Cartridge Filters with Polygard-CR Media
